Allen Company 12-Gauge Ammo Card, Holds 7-Rounds, Black

I do a fair amount of shooting, so I decided to give the Allen 7-slot hotgun card shell holder a tryout.The 3M adhesive is very aggressive and should hold up for many years of use.The velcro of the mounting strip and on the back of the shell holder are also of very good quality.The included hanging loop/handle does a good job allowing the shooter to easily remove an empty shell card so that you can install another full shell card in it’s place.The shell loops have good elasticity and are small enough to hold 20 gauge shotgun shells (if that is your end use).You can modify (cut) this product to hold less shells and fit onto a smaller area if desired.I deducted 1-Star from my product review rating due the item photos that made it appear to me that I was ordering a 2-pack of shotgun shell card holders.I recommend the Allen 7-slot shotgun card shell holder, but know that you will only be receiving 1 of this product in your order.

This review is for the Allen Company 12-Gauge Ammo Card.This is a well built ammo card, and comes with two seperate adhesive loop patches, so this could be moved between firearms. Stitching was tight at 8 stitches per inch on the loops. The adhesive backing is pretty strong, as long as you thoroughly clean the surface before applying. It is quite tacky, so position it carefully before pressing down to apply it. If you have a short receiver (as I did), you can carefully cut off one or more of the loops just in front of the loop stitching. Then flame seal the edge to prevent unraveling.This is a nice ammo card, it would be a good purchase if you need one.