Uncle Mike’s unisex adult 115 RF Blued 1′, .22 Band, Clam QD Super Swivel Full Band, Black, 1 US

This set of sling mounts fits perfectly and looks like they were made for my Henry .22 lever action rifle. Having said that, the instructions, wile fine for mounting the sling mount on the stock, were not applicable to my rifle. In my case, removing the ammo tube was impractical without total disassembly of the action. Fortunately, the front sight is very easy to remove and this allowed me simply slide the front sling mount in place just ahead of the fore-grip. I would strongly suggest mounting the stock in a suitably-padded bench vise (I just used a towel in my vice) and carefully finding the center-line of the bottom of your stock. I would also suggest using an awl and pinch to mark where you want to drill, so that the drill bit doesn’t wander all over, creating a mess of things. It is advisable to make sure that your drill bits are sharp so that they will cut with less pressure and will not burn the wood. Lastly, I would use a bit of candle wax on the threads of the retaining screw for the stock-end mount, so that the screw doesn’t grab on insertion. This will also protect the now open grain (unfinished) hole you just drilled in the stock from moisture and oil.

I got this for my Henry Lever Action .22. Not having any reviews, i was initially uneasy about ordering it, but im very glad i did now. The magazine clamp fit on my tube magazine after a little widening (required to install on most guns)with a flathead screwdriver; be sure to be gentle during this step, as many people have broken rings by adjusting too forcefully. Installation of all components was very straightforward, and well covered in the included instructions. While i wouldn’t exactly call it “quick”, using the sling mounts is very easy and the feel of all the components inspire confidence for use on my little rifle. For those of you wondering, the black rectangle pictured in the product image is a small piece of plastic you can use to shim the mount if your tube magazine is slightly too small.If you have a Henry like me, i would advise you to not follow the instructions telling you to unseat the magazine at the rear for installation. Removing the front sight is much easier and still allows you to slide the ring mount down the mag tube, just be careful that the ring is widened enough that it will not scratch the tube on the way down.Overall excellent product, good finish, and if you are even slightly mechanically inclined (as all gun owners should be) installation takes 5 minutes with a screwdriver, a drill, and 2 bits.EDIT:Three years have passed since I purchased this mounting kit so I figured it time for an update. The components are still working well as they were intended to be used, notice the qualifier of intended use. I went through a period of modifying some aspects of my rifle, and was fairly frequently removing and remounting the front tube ring. Over time after widening and closing so many times it sheared and broke in two. Disappointing but entirely the fault of my actions. The swivel eyelet was still functional so i ended up bedding it into the walnut forearm of my rifle and still use it to this day. The rear swivel has given zero trouble since installation.I still recommend this as a 5 star product, but users should know that removing the front tube ring frequently can result in metal fatigue and failure.